add share buttons

Basics Of Fence Construction

A professional fencing contractor will take all of the following things into consideration. To prevent water intrusion into the grains of wood, a gravel board should be used. There are many different types of gravel boards on the market and various factors affect which board should choose. These boards are typically produced using hard-wood and can be fitted to the bottom of the fencing panels. You can also get the best block and timber fence construction services in Melbourne.

Slopes and inclination of land consequently mean that one will need to work out an approximate gradient before placing a gravel board. Remember to communicate this with the suppliers to avoid buying an inappropriate board.

Image result for Timber and Block Fence

Image source: Google

Purchase a high-quality sealer. This is important as you must seal the fencing panels are painted. Particularly vulnerable areas such as the tops of the posts and flats exposed to winds and rain should be protected adequately by using a strong and well-known sealer.

Dig the holes to the correct depth. This depends greatly on the dimensions of the fence and posts so one will need to make references against the size you plan to buy. Gradients and location of the fence will also require various depths when digging post holes.

Choose the correct type of wood.

One must always look at a strong yet flexible type of wood. Types of wood that are naturally indigenous to the area are always a good choice. Before buying though, you should ask your local supplier for advice on what to use.

Remember though, these are just the basics of construction, and further knowledge is needed to complete the respective project effectively.